Rebel Jigga Boot

Rebel Jigga Boot.

A quality heat resistant safety boot. The Jigga is ISO 20345 and SABS approved. A perfect shoe suited for high temperature applications, this boot features a full grain, high quality Barton print leather upper, a dual density PU rubber heat-resistant sole, has a max high temperature application of 300°C (degrees Celsius), and is oil and acid resistant.

  • Full grain high quality Bartan print leather upper.
  • Breathable and abrasion resistant Taibrelle lining.
  • Dual density PU/Rubber heat-resistant sole.
  • High temperature application maximum exposure of 300°C.
  • Oil and acid resistant.
  • Excellent wearing properties – longer life sole.
  • Increased resistance to penetration.

Specifications • SABS APPROVED ISO European Norm EN20345 :2011-SB

Special Features • Sole resistant to 300ºC (degrees Celsius) • Padded Tongue ensures maximum comfort • Padded Upper Collar ensures increased comfort

Sole • Temperature Maximum 300ºC (degrees Celsius) • Oil and acid resistant PU/Rubber • Slip Resistance – Tested to SATRA PM144 1992 and meets these requirements However, care should always be taken on wet or oily surfaces • Crack Resistance – Tested to 30,000 flex cycles

Arc-Flash Protection • No breakdown at AC voltage raised at 5kvs per minute up to 20kv and held for 60 seconds • Compliant with Eskom spec 34-232

Toe Cap • Tested to an impact resistance of 200 Joules

Anti Static Properties • If application is life critical additional consultation with product expert is required electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Sizing • Available from Size 4 to Size 13 (Unisex)

Lifespan • The application determines the length of service that should be achieved. Normal environments should provide 12 months’ service, if appropriate care is taken. Refer Care guidelines

 

Rebel Jigga Boot.

A quality heat resistant safety boot. The Jigga is ISO 20345 and SABS approved. A perfect shoe suited for high temperature applications, this boot features a full grain, high quality Barton print leather upper, a dual density PU rubber heat-resistant sole, has a max high temperature application of 300°C (degrees Celsius), and is oil and acid resistant.

  • Full grain high quality Bartan print leather upper.
  • Breathable and abrasion resistant Taibrelle lining.
  • Dual density PU/Rubber heat-resistant sole.
  • High temperature application maximum exposure of 300°C.
  • Oil and acid resistant.
  • Excellent wearing properties – longer life sole.
  • Increased resistance to penetration.

Specifications • SABS APPROVED ISO European Norm EN20345 :2011-SB

Special Features • Sole resistant to 300ºC (degrees Celsius) • Padded Tongue ensures maximum comfort • Padded Upper Collar ensures increased comfort

Sole • Temperature Maximum 300ºC (degrees Celsius) • Oil and acid resistant PU/Rubber • Slip Resistance – Tested to SATRA PM144 1992 and meets these requirements However, care should always be taken on wet or oily surfaces • Crack Resistance – Tested to 30,000 flex cycles

Arc-Flash Protection • No breakdown at AC voltage raised at 5kvs per minute up to 20kv and held for 60 seconds • Compliant with Eskom spec 34-232

Toe Cap • Tested to an impact resistance of 200 Joules

Anti Static Properties • If application is life critical additional consultation with product expert is required electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Sizing • Available from Size 4 to Size 13 (Unisex)

Lifespan • The application determines the length of service that should be achieved. Normal environments should provide 12 months’ service, if appropriate care is taken. Refer Care guidelines

 

Reviews


There are no reviews yet.

Be the first to review “Rebel Jigga Boot”